BS7508 - DECKHAND DIMMER
Dimmer with adjustable time delay shut off

The BS7508 is a marine 25 amps dimmer for 12 volts lights systems. These dimmers have a timed exit mode to program the lights to turn off, by themselves, after 1 to 5 minutes. The timed exit setting allows boaters to safely and conveniently disembark before the lights automatically turn off. A very handy product for alternative energy and 12 volts lights users. Control the intensity of LED lights, incandescent, and halogen lights to create a pleasant mood.

MOUNTING FEATURES
- Connect multiple lights on the same dimmer (25 amps max.)
- A momentary water resistant switch is used to control the dimmer (BRIGHT and DIM). This switch can be mounted in a different area.
- Offset mounting tabs allow multiple dimmers to be mounted close together.

DIMMING OPTION
- Illuminated exit with adjustable time delay shut off. (explained below)
- Control from 0 to 100% brightness using continuous pulse width modulation (PWM). Changing the brightness without affecting the voltage to the lights.
- Bulb saver: prevents excessive voltage to the lights during charging. Safe for gasoline powered boats.
- Keep memory of your last dimmer setting.

USING THE ILLUMINATED TIME DELAY EXIT MODE
- One minute delay: Hold the switch up in “bright” position for 2 seconds. The lights will flash. Release switch after first flash and the lights will remain on for 1 minute.

- Two to five minute delay: Release the switch after 2 to 5 flashes. The lights will remain on for 1 additional minute for each flash up to a maximum of 5 minutes.

SPECIFICATIONS
Maximum amperage 25 amps
Nominal voltage 12 volts DC
Operating range 9 V to 16 V
Maximum parasitic current <2 mA
Temperature rating -40 °C to 85 °C
Width: 3.25” (82.55 mm)
Height: 3.5” (88.9 mm)
Weight: 0.64 lb (0.29 kg)

CERTIFICATIONS & AGENCY STANDARDS
- CE Marked
- Meets ISO 8846 ignition protection and
SAE J1171 external ignition protection requirements