MNDC-GFP50-300 50A 300VDC Ground Fault Protector DIN Rail Mount

50 amp 300VDC DIN rail mount ground fault protector (NRTL listed breaker assembly). Use this assembly on PV circuits that operate up to 300VDC when required. NEC2008 requires DC-GFP's on all Solar installations.

All MidNite circuit breakers are rated for 100% continuous duty. MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.

All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.

Breaker Torque Value: 20 In-Lbs (2.3NM)

• POLARIZED
• Width 2 inches (52mm)
• Environmental Rating - Type 1 (Indoor)
• Listed for US & Canada
• California Residents: Warning